Products Overview

Browse Products

Product Selection Tools

Catalogs and Brochures

Product Series

XEC-3001/3002/3004 E/I-P Transducer

The KMC XEC-3001/3002/3004 E/I-P Transducer converts an analog voltage (E) or current (I) signal into a linear pneumatic (P) output signal for accurate positioning of damper and valve actuators used in HVAC systems.

The transducer is not a position sensitive device. It provides a direct output feedback signal for branch line pressure.

The unit can be powered by either 24 VAC or 24 VDC. Three selectable input ranges are available. The analog voltage signal may be either 1–5 VDC or 2–10 VDC; the analog current signal of 4–20 mA provides a 3–15 psig linear pneumatic output signal. A 1–5 VDC output feedback signal, proportional and linear to the 3–15 psig output signal, is provided. A gauge tap is also provided for pressure output indication. Standard 3.25" snaptrack is supplied for mounting.

The XEC-3002 is the XEC-3001 module mounted in an HCO-1008 enclosure (not shown).

The XEC-3004 is the XEC-3001 module (only) with a manual (H/O/A) override.

Application

The KMC XEC-3001/3002/3004 E/I-P Transducer is used in HVAC systems to provide an accurate signal for positioning damper and valve actuators based on branch line pressure.

Product	Data Sheet	Description
XEC-3002	(Download)	XEC-3001 MOUNTED IN HCO-1008 ENCLOSURE
XEC-3001	(Download)	E-P, I-P TRANSDUCER
XEC-3004	(Download)	E/I-P TRANSDUCER (XEC-3001 Module w/ Manual Override)

Hang Fung Technology Company Limited

Tel:(852)2892 1992
Fax:(852)2836 0448
Email:hangfungtec@gmail.com

Overview
Browse Products
Product Selection Tools
Catalogs and Brochures