Products Overview

Browse Products

Product Selection Tools

Catalogs and Brochures

Product Series

BAC-5841/5842 UFAD Advanced Application Controllers, 8 x 8

These native BACnet, fully programmable, direct digital controllers are factory pre-programmed and pre-configured for use in Under Floor Air Distribution (UFAD) applications. They have modular input and output jacks to simplify field wiring, using standard Ethernet cables (with modular RJ-45 plugs) for input sensors and KMC HSO-2113 series cables with RJ-12 modular plugs on the outputs. Outputs are typically connected to KMC MEP-4042/4842 proportional actuators with integral RJ-12 modular jacks.

They can provide up to five individual zones of control using a KMD-1x6x/1x8x NetSensor and up to four STE-6014 or STE-6016 wall sensors. They are pre-configured to provide five cooling zones. Two outputs may also be changed from cooling to heating. Depending on cable lengths and power wiring used, up to eight MEP-4042/4842 actuators may be driven in each chain, and each chain can be individually tied to any of five zone sensors. These models can also be used with UFAD diffuser actuators manufactured by KMC Controls for specific OEMs.

These controllers provide precise monitoring and control of connected points. Remote building automation systems may further command occupancy modes and control setpoints of the networked devices, process alarm conditions, and use information generated by the controllers to optimize the performance of “upstream” air handlers, fans, and other building automation functions.

For VAV zoning applications, see the BAC-5841-16 and BAC-5842-16.

Product	Data Sheet	Description
BAC-5841	(Download)	BACnet Modular Under Floor Controller 8 x 8 with real-time clock
BAC-5842	(Download)	BACnet Modular Under Floor Controller 8 x 8 without real-time clock

Hang Fung Technology Company Limited

Tel:(852)2892 1992
Fax:(852)2836 0448
Email:hangfungtec@gmail.com

Overview
Browse Products
Product Selection Tools
Catalogs and Brochures